69系列方滑枕鏜銑頭
落地鏜銑床，主要適應于單件小批量生產性質的冶金、礦山、通用機械的大型機架和箱體的加工，如鏜孔、鉆擴孔、刮平面及用銑刀進行銑削加工。機床的主要部分——主軸和方滑枕。主軸有方滑枕的支持，增強了銑削時的剛性，適應于大型零件的強力銑削，方滑枕的伸出提高了接近工件加工面的性能，同時也對鏜軸起支承作用，增強了鏜削時的剛性，在方滑枕的端部，適合安裝多種加工附件來進行平面和垂直的銑削、鏜孔、鉆孔等加工，能夠進一步擴大機床的使用范圍。
Floor type boring and milling machine is mainly used for machining such as boring bole & enlarge hole,milling surface or the others milling work with milling tol for the big frme and case that are small lot required by metallurgical machinery,mining machinery and the others general machinery.This machine"s core parts are main spindle and square ram.The main spindle is supported by square ram to get more stronger rigidity when milling.so it can realise strong milling to big scale parts.The extended square ram not only make tool more approach to the parts machined surface,but can support boring rod to enhance its rigidity.The end of ram can be casily installed variety tool for machining of plane or vertining of plane or verical milling,boring,which can more enlarge machine"s working slope.
| 落地鏜銑床 Floor Type Boring and Milling Machine | ||
| 規格Spec. 型號Model | TX130 | TX160 |
|
鏜軸直徑(mm) Dia.Of Boring Rod |
φ130 | φ160 |
|
鏜軸錐孔 Taper Hole of Boring Rod |
莫氏(Mohs)6# | 公制(Metric)80 |
|
銑軸直徑(mm) |
φ190 | φ240 |
|
滑枕截面積(mm) Ram SEction |
380×380 | 440×440 |
|
滑枕行程(mm) Ram Stroke |
600 | 800 |
|
鏜軸行程(mm) Stroke Of Boring Rod |
800 | 1200 |
|
滑枕鏜總行程(mm) Total Stroke |
1400 | 2000 |
|
主軸轉速(r/min) Main Spindle Rev. |
13~446(六檔,無級調速) Six shifts with stepless |
13~446(六檔,無級調速) Six shifts with stepless |
|
滑枕進出速度(mm/min) Feed Speed Of Ram |
50~400(無級調速) with stepless |
50~400(無級調速) with stepless |
|
主軸進出速度(mm/min) Feed Speed Of Main Spindle |
50~400(無級調速) with stepless |
50~400(無級調速) with stepless |
|
主軸箱低速升降(mm/min) Low Speed Of Heandstock |
50~400(無級調速) with stepless |
50~400(無級調速) with stepless |
|
主軸箱高速升降(mm/min) High Speed Of Headstock |
1300 | 1300 |
|
主電機功率(kw) Main Motor Power |
22 | 30 |
|
電機總功率(kw) Total Power |
41.05 | 49.05 |
|
立柱低速行走(mm/min) Low Speed Of Upright Column |
50~430(無級調速) with stepless |
50~430(無級調速) with stepless |
|
立柱高速行走(mm/min) High Speed Of Upright Column |
185~1480(無級調速) with stepless |
185~1480(無級調速) with stepless |
|
主軸箱行程(mm) Stroke Of Headstock |
2500(可加高) Can be enlarged |
2500(可加高) Can be enlarged |
|
立柱水平行程(mm) Horizontal Stroke Of Upright Column |
6000(可加長) Can be enlarged |
6000(可加長) Can be enlarged |
|
機床外形尺寸L×W×H(mm) Appearance Size Of Machine Tool |
9500×3500×6400 | 10500×4800×6100 |
|
機床總重量(kg) Total Weight Of Machine Tool |
40000 | 52000 |
|
機床可選購附件 Accessories For Machine |
直角鏡頭,萬能銑頭,平旋盤 Right cutter head,Universal cutter head and facer |
直角鏡頭,萬能銑頭,平旋盤 Right cutter head,Universal cutter head and facer |
|
機床可選購配套件 Matching parts for Machine |
平板工作臺,回轉工作臺 Flat table and swivel table |
平板工作臺,回轉工作臺 Flat table and swivel table |
|
以上參數僅供參考,可根據用戶要求作部分調整.最終解釋權歸本公司 Aboved parameters only for reference but can be modified according to user’s requirement.All rights reserved. |
||
- 上一個：TX130、TX160手動型 鏜銑頭
- 下一個：TPX130數控鏜銑床